- Series :
- Voltage - Rated :
- Operating Temperature :
- Termination Style :
- Current Rating :
- Diameter - Shaft :
- Length - Shaft and Bearing :
- Mounting Hole Spacing :
- Coil Type :
- Coil Resistance :
- Filtro seleccionado :
42 Produto
| Imagem | Modelo | Preço | Número | Existências | Fabricante | Descrever | Series | Part Status | Voltage - Rated | Operating Temperature | Size / Dimension | Features | Type | Termination Style | Current Rating | Accuracy | Diameter - Shaft | Length - Shaft and Bearing | Mounting Hole Spacing | Coil Type | Steps per Revolution | Step Angle | Torque - Holding (oz-in / mNm) | NEMA Frame Size | Coil Resistance | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Ver |
1,917
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 297.38 / 2100 | 24 | - | ||
|
|
Ver |
1,226
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 438.99 / 3100 | 24 | - | ||
|
|
Ver |
3,533
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.250" (6.35mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 77.89 / 550 | 24 | - | ||
|
|
Ver |
2,414
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 297.38 / 2100 | 24 | - | ||
|
|
Ver |
1,842
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.250" (6.35mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 143.05 / 1010 | 24 | - | ||
|
|
Ver |
2,582
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 24V | PANdrive™ | Active | 24VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.250" (6.35mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 143.05 / 1010 | 24 | - | ||
|
|
Ver |
3,985
Disponível EM stock
|
Trinamic Motion Control GmbH | STEP MOTOR HYBRID BIPOLAR 2.52V | QMot QSH6018 | Active | 2.52VDC | -20°C ~ 50°C | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Flatted Shaft | Hybrid | Wire Leads | 2.8A | ±5% | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 233.66 / 1650 | 24 | 900 mOhms | ||
|
|
Ver |
1,643
Disponível EM stock
|
Trinamic Motion Control GmbH | STEP MOTOR HYBRID BIPOLAR 2.1V | QMot QSH6018 | Active | 2.1VDC | -20°C ~ 50°C | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Flatted Shaft | Hybrid | Wire Leads | 2.8A | ±5% | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 155.77 / 1100 | 24 | 700 mOhms | ||
|
|
Ver |
3,062
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 438.99 / 3100 | 24 | - | ||
|
|
Ver |
3,405
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 24V | PANdrive™ | Active | 24VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 438.99 / 3100 | 24 | - | ||
|
|
Ver |
3,634
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 24V | PANdrive™ | Active | 24VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.250" (6.35mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 77.89 / 550 | 24 | - | ||
|
|
Ver |
1,275
Disponível EM stock
|
Trinamic Motion Control GmbH | STEP MOTOR HYBRID BIPOLAR 3.36V | QMot QSH6018 | Active | 3.36VDC | -20°C ~ 50°C | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Flatted Shaft | Hybrid | Wire Leads | 2.8A | ±5% | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 297.38 / 2100 | 24 | 1.2 Ohms | ||
|
|
Ver |
3,655
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 24V | PANdrive™ | Active | 24VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 297.38 / 2100 | 24 | - | ||
|
|
Ver |
3,553
Disponível EM stock
|
Trinamic Motion Control GmbH | STEP MOTOR HYBRID BIPOLAR 4.17V | QMot QSH6018 | Active | 4.17VDC | -20°C ~ 50°C | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Flatted Shaft | Hybrid | Wire Leads | 2.8A | ±5% | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 438.99 / 3100 | 24 | 1.5 Ohms | ||
|
|
Ver |
1,230
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.250" (6.35mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 143.05 / 1010 | 24 | - | ||
|
|
Ver |
2,148
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.250" (6.35mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 77.89 / 550 | 24 | - | ||
|
|
Ver |
2,684
Disponível EM stock
|
NMB Technologies Corporation | HYBRID 23 STEP MOTOR LOW BACKLAS | GT | Active | 24VDC | -10°C ~ 50°C | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Flatted Shaft | Hybrid Gear Motor | Wire Leads | 900mA | - | 0.315" (8.00mm) | 1.260" (32.00mm) | 1.949" (49.50mm) | Unipolar | 6000 | 0.06° | 566.57 / 4000 | 24 | 5.8 Ohms | ||
|
|
|
Ver |
925
Disponível EM stock
|
NMB Technologies Corporation | HYBRID 23 STEP MOTOR LOW BACKLAS | GT | Active | 24VDC | -10°C ~ 50°C | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Flatted Shaft | Hybrid Gear Motor | Wire Leads | 900mA | - | 0.315" (8.00mm) | 1.260" (32.00mm) | 1.949" (49.50mm) | Unipolar | 4000 | 0.09° | 495.75 / 3500 | 24 | 5.8 Ohms | ||
|
|
|
Ver |
1,725
Disponível EM stock
|
NMB Technologies Corporation | HYBRID 23 STEP MOTOR LOW BACKLAS | GT | Active | 24VDC | -10°C ~ 50°C | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Flatted Shaft | Hybrid Gear Motor | Wire Leads | 900mA | - | 0.315" (8.00mm) | 1.260" (32.00mm) | 1.949" (49.50mm) | Unipolar | 2000 | 0.18° | 424.93 / 3000 | 24 | 5.8 Ohms | ||
|
|
|
Ver |
3,346
Disponível EM stock
|
NMB Technologies Corporation | HYBRID 23 STEP MOTOR LOW BACKLAS | GT | Active | 24VDC | -10°C ~ 50°C | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Flatted Shaft | Hybrid Gear Motor | Wire Leads | 900mA | - | 0.315" (8.00mm) | 1.260" (32.00mm) | 1.949" (49.50mm) | Unipolar | 1440 | 0.25° | 354.07 / 2500 | 24 | 5.8 Ohms | ||
|
|
|
Ver |
2,117
Disponível EM stock
|
NMB Technologies Corporation | HYBRID 23 STEP MOTOR LOW BACKLAS | GT | Active | 24VDC | -10°C ~ 50°C | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Flatted Shaft | Hybrid Gear Motor | Wire Leads | 900mA | - | 0.315" (8.00mm) | 1.260" (32.00mm) | 1.949" (49.50mm) | Unipolar | 720 | 0.5° | 177.04 / 1250 | 24 | 5.8 Ohms | ||
|
|
|
Ver |
1,917
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 297.38 / 2100 | 24 | - | ||
|
|
|
Ver |
1,226
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 438.99 / 3100 | 24 | - | ||
|
|
|
Ver |
3,533
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.250" (6.35mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 77.89 / 550 | 24 | - | ||
|
|
|
Ver |
2,414
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 297.38 / 2100 | 24 | - | ||
|
|
|
Ver |
1,842
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.250" (6.35mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 143.05 / 1010 | 24 | - | ||
|
|
|
Ver |
2,582
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 24V | PANdrive™ | Active | 24VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.250" (6.35mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 143.05 / 1010 | 24 | - | ||
|
|
|
Ver |
3,985
Disponível EM stock
|
Trinamic Motion Control GmbH | STEP MOTOR HYBRID BIPOLAR 2.52V | QMot QSH6018 | Active | 2.52VDC | -20°C ~ 50°C | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Flatted Shaft | Hybrid | Wire Leads | 2.8A | ±5% | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 233.66 / 1650 | 24 | 900 mOhms | ||
|
|
|
Ver |
1,643
Disponível EM stock
|
Trinamic Motion Control GmbH | STEP MOTOR HYBRID BIPOLAR 2.1V | QMot QSH6018 | Active | 2.1VDC | -20°C ~ 50°C | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Flatted Shaft | Hybrid | Wire Leads | 2.8A | ±5% | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 155.77 / 1100 | 24 | 700 mOhms | ||
|
|
|
Ver |
3,062
Disponível EM stock
|
Trinamic Motion Control GmbH | STEPPER MOTOR HYBRID BIPOLAR 48V | PANdrive™ | Active | 48VDC | - | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | Integrated Controller, Flatted Shaft | Hybrid | Wire Leads with Connector | 2.8A | - | 0.315" (8.00mm) | 0.945" (24.00mm) | 1.856" (47.14mm) | Bipolar | 200 | 1.8° | 438.99 / 3100 | 24 | - |
1 / 2 Página
